ARC WOOD SEALANT OAK 300ML
Price: €5.50
Product details
Single component solvent free acrylate sealant for sealing joints with sealed and unsealed parquet. Curing system based on acrylic dispersion.
Benefits
• Readily sandable
• Free of solvent, phthalate, glycol and APEO-free
• Compatible with paints (in accordance with DIN 52452-4, A1 & A2)
• Weather and ageing resistant, good UV resistance
• Long shelf life
• High initial and final adhesion
Areas For Use
For sealing connections and joints with low tensile stress and without constant exposure to moisture, e.g. between parquet, wood, concrete, fiber cement, plasterboard, bare and anodized aluminium, and rigid PVC. Also suitable for bonding expanded polystyrene on absorbent substrates.
How To
Substrate pretreatment
The substrate must be dry, firm and free of dust and grease. At least one of the surfaces to be bonded must be absorbent or diffusion permeable. Before sealant application, remove any cement slurry, mould release agents or impregnations. In renovation projects, old sealant, remains of paint and loose material must be fully removed. The joint must always be provided with a suitable, correctly dimensioned backing (e.g. PE cord , PE foil) to prevent adhesion on three faces. To avoid contamination and to achieve a precise joint, we recommend masking the joint edges with adhesive tape before primer application and filling.
Joint dimensions
The thickness of the joint should be at least 7 mm. The sealant is capable of levelling uneven patches of up to 15mm
Bonding
Bonding can be effected immediately after straight or curved application of the adhesive(using a suitable manual, battery powered or pneumatic caulking gun). Where bonding is effected after a skin has formed, the surfaces to be bonded must be displaced relative to each other so as to break the skin. Bonding should be completed after a maximum of 15 minutes following application of the adhesive. Corrections are still possible after a short period of time. Depending on the bond thickness, heavy weight parts require additional securing until the initial strength is reached (about 24 hours). Any adhesive tape used can be removed immediately after bonding.
